PET perform plastic injection machine

PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle ... PET perform plastic injection machinePET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. 1.Special injection construction designed to benefit for plasticizing. 2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm. 3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C. 4. Microprocessor controller with 4 stages injection, 3 stages holding pressure. 5. Shut-down memory is able to store up to 100 preset mold data memory.6.Higher stability and lower defect in PET preform dimension

SPECOFOCATION	UNIT	ALL268
injection unit
screw diameter	mm	60
screw l/d ratio	L/D	25
shot volume(theoretical)	cm	707
shot weight	g	636
injection pressure	mpa	142
injection speed	mm/s	91
screw speed	rpm	0-180
clamping unit
clamping force	KN	2680
toggle stroke	mm	540
space between tie bars	mm	570X570
max.mould height	mm	600
min.mould height	mm	220
ejector stroke	mm	130
ejector force	KN	62
ejector number	PG	9
others
max.pump pressure	Mpa	16
pump motor power	KW	22
heater power	KW	17
machine dimensions(LXWXH)	m	6.09X1.41X2.34
oil tank capacity	L	315
machine weight	Ton	9

PET perform plastic injection machine