PET plastic injection machine

PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle ... PET perform plastic injection machinePET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. 1.Special injection construction designed to benefit for plasticizing. 2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm. 3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C. 4. Microprocessor controller with 4 stages injection, 3 stages holding pressure. 5. Shut-down memory is able to store up to 100 preset mold data memory.6.Higher stability and lower defect in PET preform dimension.

Specofocation	Unit	ALL368
injection unit
screw diameter	mm	75
screw l/d ratio	L/D	25
shot volume(theoretical)	cm	1457
shot weight	g	1325
injection pressure	mpa	156
injection speed	mm/s	92
screw speed	rpm	0-180
clamping unit
clamping force	KN	3680
toggle stroke	mm	700
space between tie bars	mm	725X705
max.mould height	mm	750
min.mould height	mm	250
ejector stroke	mm	160
ejector force	KN	110
ejector number	PG	13
others
max.pump pressure	Mpa	16
pump motor power	KW	37
heater power	KW	22
machine dimensions(LXWXH)	m	7.53X1.87X2.57
oil tank capacity	L	650
machine weight	Ton	15

 

PET plastic injection machine