PET perform plastic injection machine

PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle ... PET preform plastic injection machinePET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. 1.Special injection construction designed to benefit for plasticizing. 2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm. 3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C. 4. Microprocessor controller with 4 stages injection, 3 stages holding pressure. 5. Shut-down memory is able to store up to 100 preset mold data memory.6.Higher stability and lower defect in PET preform dimension

Specofocation	Unit	ALL308
injection unit
screw diameter	mm	70
screw l/d ratio	L/D	25
shot volume(theoretical)	cm	989
shot weight	g	900
injection pressure	mpa	157
injection speed	mm/s	86
screw speed	rpm	0-180
clamping unit
clamping force	KN	3080
toggle stroke	mm	600
space between tie bars	mm	600X660
max.mould height	mm	660
min.mould height	mm	250
ejector stroke	mm	160
ejector force	KN	70
ejector number	PG	13
others
max.pump pressure	Mpa	16
pump motor power	KW	30
heater power	KW	18.7
machine dimensions(LXWXH)	m	7.05X1.71X2.42
oil tank capacity	L	550
machine weight	Ton	11

PET perform plastic injection machine