PET perform plastic injection machine

PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle ... PET preform plastic injection machinePET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. 1.Special injection construction designed to benefit for plasticizing. 2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm. 3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C. 4. Microprocessor controller with 4 stages injection, 3 stages holding pressure. 5. Shut-down memory is able to store up to 100 preset mold data memory.6.Higher stability and lower defect in PET preform dimension

Specofocation	Unit	ALL218
injection unit
screw diameter	mm	55
screw l/d ratio	L/D	25
shot volume(theoretical)	cm	449
shot weight	g	449
injection pressure	mpa	144
injection speed	mm/s	98
screw speed	rpm	0-180
clamping unit
clamping force	KN	2180
toggle stroke	mm	470
space between tie bars	mm	515X515
max.mould height	mm	530
min.mould height	mm	200
ejector stroke	mm	130
ejector force	KN	62
ejector number	PG	5
others
max.pump pressure	Mpa	16
pump motor power	KW	18.5
heater power	KW	13
machine dimensions(LXWXH)	m	5.8X1.34X2.27
oil tank capacity	L	280
machine weight	Ton	6.7

PET perform plastic injection machine